80 PLUS power supply 500w Desktop PSU RPD500-60EGN
The Product Features
- Worldwide Input Voltage 100Vac-240Vac
- Active PFC Within 0.99 Power Factor Correction
- Dual 12V Rails To Fulfill System Protection Demand
- Own Patent IC To Offer High Performance And Efficiency
- 12cm Fan Provide Ultra Silent User Environment
PC PSU Introduction
- Dimension 140 (L) x 150 (W) x 86 (H) mm
- Output Wattage 500W
- Efficiency 87% 90% 87%
The PC PSU DESCRIPTION
This specification describes a 500 watts power supply. With 6 output, and remote ON/OFF control for ATX-12V system and a “Power factor correction (active PFC)” circuit at 100V-240Vac.
APPLICATION: Desktop
WATTAGE: 500W
DIMENSION : 140mm(L) x 150mm(W) x 86mm(H)
PRODUCT HIGHLIGHT
- Efficiency Level: 80PLUS Gold
- Erp Lot: <0.5W
- Input Voltage: 100~240Vac
INPUT SPECIFICATION
- Input Range: 100-240 Vac
- Input Frequency: 47-63 Hz
- Input Current: 115V@ < 8.0 Amps - rms 230V@ < 4.0 Amps - rms
OUTPUT SPECIFICATION
Output Rise Time:
- +3.3V 20mS (maximum)
- +5V 20mS (maximum)
- +12 V 20mS (maximum)
- -12 V 20mS (maximum)
Hold up Time: 115V/60Hz 17mSec. Minimum@100% Load,
GENERAL SPECIFICATION
- Efficiency: 87%@ 20% load; 90%@ 50% load;87%@ 100% load
- PWOK Delay Time: 500ms > PWOK > 100ms
- EMC Performance: EN55022 class B
ENVIRONMENTAL SPECIFICATION
- TEMP.Range: Storage Temperature: -40°C to + 70℃
- MTBF:The power supply reliability, when calculated by “Bellcore” latest revision are exceed 100,000 hours with all output at maximum load and an ambient temperature of 25℃.
Output Voltage and Current Rating
| | +3.3V | +5V | +12V1 | +12V2 | -12V | +5Vsb |
| Ripple-Noise(R-P) mV | 50mV | 50mV | 50mV | 120mV | 200mV | 50mV |
| Regulation Load % | ±5% | ±5% | ±5% | ±5% | ±10%% | ±5% |
| Output Max.(A) | 24A | 24A | 18A | 18A | 0.3A | 3.5A |
| Output Min.(A) | 0.1A | 0.2A | 0.1A | 0A | 0A | 0A |
NOTES
1) +3.3V & +5V total output not exceed 130W.
When +5V is load to 22A, the +3.3V maximum load is 3A. When +3.3V is load to 24A, the +5V maximum load is 10A.
(2) +12V1 & +12V2 total output not exceed 432W(36A).
(3) All outputs shall be safety-isolated from the AC mains and share a common return. This common return must be connected to supply chassis.
(4) Voltages and ripple are measured at the load side of mating connectors with a 0.1uF monolithic ceramic capacitor paralleled by a 10uF electrolytic capacitor across the measuring terminals.
This content is subject to change, please refer to specification for more detail.
Product Tags:
|
|
High Performance Desktop Power Supply Unit , 500 Watt Silent Power Supply Images
|
